Our products are cost-efficient in the long run, as they reduce the frequency of maintenance while also ensuring safety and comfort for their road users.   

The combined use of performance-based design methods and high-performance asphalts has been widely adopted among airport operators and has demonstrated significant improvement in terms of service life, airfield traffic capacity, thereby generating considerable savings in maintenance costs for airports operators and flight carriers.

Light Aircraft Airports do not always require the use of premium bitumen, considering their relatively low traffic and relatively low level of solicitations. We can propose a wide range of cost-effective yet well-adapted solutions to meet our customers’ requirements.

Formula 1 and other racetracks and roadways undergo a peculiar and highly aggressive solicitation. Tangential stress on a racetrack pavement is high due to brutal acceleration and braking, especially around the curves. Therefore, driver safety must be ensured under any circumstances.

The combined use of performance-based design methods and high-performance asphalts has been widely adopted in Asia and has demonstrated significant improvement in terms of service life, road pavement traffic capacity, thereby generating considerable savings in maintenance costs for project owners and road operators.

ADCo can propose a wide range of cost-effective, yet well-adapted, solutions for the rural environment, taking into consideration the local constraints related to remote projects.

Innovative runway pavement design using 40/50 bitumen and PMB. This the first Airport project in Vietnam under the investment of province (Hai Phong City) instead of invested by ACV as other projects. The project owner - Hai Phong Bridge Project Unit - required high quality of asphalt material to ensure the long time service life of the runway with increasing of number and load of airplane. The KBC Naphthenic 40/50 bitumen had been use to make hard asphalt layer with full supplied of 4500mt by ADCo. This is the first Runway project to applied the 40/50 for the asphalt base. The runway remains good quality till this moment over year of operations.   Project name: Cat Bi International Airport Year: 2014-2015 Location: Hai Phong City Investors: Hai Phong City Contractors: ACC, Phuc Loc Consultant: ADCC Volume: 4,500 MT KBC 40/50 & 1,200 MT PMB III Scope of project: 3.4km of runway Spec. of Products: 40/50 & PMB III

A major first in cold-in-place recycling in Vietnam ADCo has been involved in the rehabilitation of a 32-km segment of Highway 13 by using cold in-place recycling technique with EcoStab® emulsion for an important heavy-duty traffic road located in Southern Vietnam, connecting Ho Chi Minh City to Cambodia. The road pavement was initially constructed in 2012, but after 8 years of service under heavy traffic, the existing asphalt pavement started to show serious structural problems as well as rutting. After several attempts to repair the road, the Toll Road Operator decided to perform deep structural rehabilitation of the pavement. The cold-in place recycling technique was selected since the client was looking for a cost-effective solution that allows a 100% reuse of in-situ materials with minimum disturbance to the traffic.   Project name: ​​​​​​NH13 Binh Duong - Binh Phuoc (Cold in-place Recycling) Years: 2020 Location: Binh Phuoc Investors:  Binh Phuoc Infrastructure Construction and Investment Joint Stock Company Contractors: Infrasol Company Limited Consultant: 568 Investment & Consulting Joint Stock Company Scope of project: 32km of 4 lanes Construction section: FDR 15cm including old asphalt and base course. Overlay with HMA 40/50 on top

The First project uses 40/50 bitumen for the Base course.  The most challenging area of Vietnam on the NH1 North-South extension on super hot and dry climate area with heavy export fruit cargo-track, the project's task is the last section to connect the whole NH1 backbone North-South Viet Nam for the extension from 2 to 4 lanes   Project name: HW1A Ninh Thuan Products: 40/50 + PMB Years: 2014-2016 Location: Ninh Thuan Province Investors:  CII BOT Co. Contractors: BMT,Son Long Thuan, Roadco Consultant: TEDI Scope of project: 37km of 4 lanes Construction section:  Asphalt binder using KBC 40/50 - PMB3 wearing course  

First Highway project using 40/50 for the surface course. Maintenance and upgrading project on HW13 from KM62+700 to KM95+000 in Binh Phuoc province, was started in May 2019 under BOT contract. The existing asphalt pavement was showing important rutting after many years of service under severe traffic and climate condition. Due to Budget constraints, the use of PMB was not feasible. Therefore, project owner decided to consider alternative products that could provide added value on rutting resistance with limited impact on construction budget. 40/50 KBC Naphthenic was then proposed for the structural overlay on HW13 pavement.   Project name: HW13 BOT Products: KBC Naphthanic 40/50 and EcoStab® Years: 2019-2020 Location: Binh Phuoc Investors:  Binh Phuoc Infrastructure Construction and Investment Joint Stock Company Contractors: Infrasol Company Limited Consultant: 568 Investment & Consulting Joint Stock Company Scope of project: 32km of 4 lanes Construction section:  FDR 15cm including old asphalt and base course. Overlay with HMA 40/50 on top

High-performing range of binders that can sustain extreme traffic conditions.

All standard grade bitumens comply with the technical specifications of the Ministry of Transport.

We formulate high-quality tailor-made emulsions for a wide range of applications and pavement conditions.

ASC® is a highly effective anti-stick release agent for use when working with bituminous mixtures. It prevents bituminous mixtures from sticking to the beds of delivery trucks, paver hoppers, roller drums, sleighs of microsurfacing trucks, and hand tools such as shovels, rakes, and buckets. ASC® is available in 1000-liter IBCs and 200- or 25-liter drums.

Cold Patch® is a ready to use storable cold mix asphalt. Very easy to use and durable, Cold Patch® cold mix asphalt in a bag simplifies routine small scale road repairs. Mixed and applied cold, it is environment friendly.